Writing custom facts

A typical fact in Facter is an collection of several elements, and is written either as a simple value (“flat” fact) or as structured data (“structured” fact). This page shows you how to write and format facts correctly.

Important: You must be able to distinguish facts from resolutions. A fact is a piece of information about a given node, while a resolution is a way of determining the value of an applicable fact. The following is a structure of a fact:
 
Facter.add(:my_custom_fact) do
   <resolution>
end
 
A single fact can have multiple resolutions. A resolution details how, when and in which order to obtain the value for a fact. It is common to have different resolutions for different operating systems. To add a new resolution to a fact, you add the fact again but with a different setcode statement.

You need some familiarity with Ruby to understand most of these examples. For an introduction, see out the Custom facts overview. For information on how to add custom facts to modules, see Module plug-in types.

Writing facts with simple resolutions

Most facts are resolved all at the same time, without any need to merge data from different sources. In that case, the resolution is simple. Both flat and structured facts can have simple resolutions.

Main components of simple resolutions

Simple facts are typically made up of the following parts:
  1. A call to Facter.add(:fact_name):

    • This introduces a new fact or a new resolution for an existing fact with the same name.
    • The name can be either a symbol or a string.

    • The rest of the fact is wrapped in the add call’s do ... end block.

  2. Zero or more confine statements:

    • Determine whether the resolution is suitable (and therefore is evaluated).

    • Can either match against the value of another fact or evaluate a Ruby block.

    • If given a symbol or string representing a fact name, a block is required and the block receives the fact’s value as an argument.

    • If given a hash, the keys are expected to be fact names. The values of the hash are either the expected fact values or an array of values to compare against.

    • If given a block, the confine is suitable if the block returns a value other than nil or false.

  3. An optional has_weight statement:

    • When multiple resolutions are available for a fact, resolutions are evaluated from highest weight value to lowest.

    • Must be an integer greater than 0.

    • Defaults to the number of confine statements for the resolution.

  4. A setcode statement that determines the value of the fact:

    • Can take either a string or a block.

    • If given a string, Facter executes it as a shell command. If the command succeeds, the output of the command is the value of the fact. If the command fails, the next suitable resolution is evaluated.

    • If given a block, the block’s return value is the value of the fact unless the block returns nil. If nil is returned, the next suitable resolution is evaluated.

    • Can execute shell commands within a setcode block, using the Facter::Core::Execution.exec function.

    • If multiple setcode statements are evaluated for a single resolution, only the last setcode block is used.

    Note: Set all code inside the sections outlined above ⁠— there must not be any code outside setcodeand confine blocks other than an optional has_weight statement in a custom fact.

How to format facts

The format of a fact is important because of the way that Facter evaluates them — by reading all the fact definitions. If formatted incorrectly, Facter can execute code too early. You need to use the setcode correctly. Below is a good example and a bad example of a fact, showing you where to place the setcode.

Note: In Facter versions prior to 4.7.0, a bug causes fact values inside confine blocks to be downcased, which prevents the following examples from working as expected. This bug has been fixed in Facter 4.7.0. For more information, visit Facter 4.7.0.

Good:

Facter.add('phi') do
  confine owner: "BTO"
  confine :kernel do |value|
    value == "Linux"
  end
 
  setcode do
    bar=Facter.value('theta')
    bar + 1
  end
end

In this example, the bar=Facter.value('theta') call is guarded by setcode, which means it is not executed unless or until it is appropriate to do so. Facter loads all Facter.add blocks first, use any OS or confine/weight information to decide which facts to evaluate, and once it chooses, it selectively executes setcode blocks for each fact that it needs.

Bad:

Facter.add('phi') do
  confine owner: "BTO"
  confine :kernel do |value|
    value == "Linux"
  end
  
  bar = Facter.value('theta')
 
  setcode do
    bar + 1
  end
end

In this example, the Facter.value('theta') call is outside of the guarded setcode block and in the unguarded part of the Facter.add block. This means that the statement always executes, on every system, regardless of confine, weight, or which resolution of phi is appropriate. Any code with possible side-effects, or code pertaining to figuring out the value of a fact, must be kept inside the setcode block. The only code left outside setcode is code that helps Facter choose which resolution of a fact to use.

Examples

The following example shows a minimal fact that relies on a single shell command:

Facter.add(:rubypath) do
  setcode 'which ruby'
end

The following example shows different resolutions for different operating systems:

Facter.add(:rubypath) do
  setcode 'which ruby'
end

Facter.add(:rubypath) do
  confine osfamily: "Windows"
  # Windows uses 'where' instead of 'which'
  setcode 'where ruby'
end
The following example shows a more complex fact, confined to Linux with a block:
Facter.add(:jruby_installed) do
  confine :kernel do |value|
    value == "Linux"
  end

  setcode do
    # If jruby is present, return true. Otherwise, return false.
    Facter::Core::Execution.which('jruby') != nil
  end
end

Writing structured facts

Structured facts can take the form of hashes or arrays.

You don’t have to do anything special to mark the fact as structured — if your fact returns a hash or array, Facter recognizes it as a structured fact. Structured facts can have simple or aggregate resolutions.

Example: Returning an array of network interfaces

Facter.add(:interfaces_array) do
  setcode do
   interfaces = Facter.value(:interfaces)
   # the 'interfaces' fact returns a single comma-delimited string, such as "lo0,eth0,eth1"
   # this splits the value into an array of interface names
   interfaces.split(',')
  end
end

Example: Returning a hash of network interfaces to IP addresses

Facter.add(:interfaces_hash) do
  setcode do
    interfaces_hash = {}

    Facter.value(:interfaces_array).each do |interface|
      ipaddress = Facter.value("ipaddress_#{interface}")
      if ipaddress
        interfaces_hash[interface] = ipaddress
      end
    end

    interfaces_hash
  end
end

Writing facts with aggregate resolutions

Aggregate resolutions allow you to split up the resolution of a fact into separate chunks.

By default, Facter merges hashes with hashes or arrays with arrays, resulting in a structured fact, but you can also aggregate the chunks into a flat fact using concatenation, addition, or any other function that you can express in Ruby code.

Main components of aggregate resolutions

Aggregate resolutions have two key differences compared to simple resolutions: the presence of chunk statements and the lack of a setcode statement. The aggregate block is optional, and without it Facter merges hashes with hashes or arrays with arrays.

  1. A call to Facter.add(:fact_name, :type => :aggregate):

    • Introduces a new fact or a new resolution for an existing fact with the same name.

    • The name can be either a symbol or a string.

    • The :type => :aggregate parameter is required for aggregate resolutions.

    • The rest of the fact is wrapped in the add call’s do ... end block.

  2. Zero or more confine statements:

    • Determine whether the resolution is suitable and (therefore is evaluated).

    • They can either match against the value of another fact or evaluate a Ruby block.

    • If given a symbol or string representing a fact name, a block is required and the block receives the fact’s value as an argument.

    • If given a hash, the keys are expected to be fact names. The values of the hash are either the expected fact values or an array of values to compare against.

    • If given a block, the confine is suitable if the block returns a value other than nil or false.

  3. An optional has_weight statement:

    • Evaluates multiple resolutions for a fact from highest weight value to lowest.

    • Must be an integer greater than 0.

    • Defaults to the number of confine statements for the resolution.

  4. One or more calls to chunk, each containing:

    • A name (as the argument to chunk).

    • A block of code, which is responsible for resolving the chunk to a value. The block’s return value is the value of the chunk; it can be any type, but is typically a hash or array.

  5. An optional aggregate block:

    • If absent, Facter automatically merges hashes with hashes or arrays with arrays.

    • To merge the chunks in any other way, you need to make a call to aggregate, which takes a block of code.

    • The block is passed one argument (chunks, in the example), which is a hash of chunk name to chunk value for all the chunks in the resolution.

Example: Building a structured fact progressively

This example builds a new fact, networking_primary_sha, by progressively merging two chunks. One chunk encodes each networking interface’s MAC address as an encoded base64 value, and the other determines if each interface is the system’s primary interface.
require 'digest'
require 'base64'

Facter.add(:networking_primary_sha, :type => :aggregate) do

  chunk(:sha256) do
    interfaces = {}

    Facter.value(:networking)['interfaces'].each do |interface, values|
      if values['mac']
        hash = Digest::SHA256.digest(values['mac'])
        encoded = Base64.encode64(hash)
        interfaces[interface] = {:mac_sha256 => encoded.strip}
      end
    end

    interfaces
  end

  chunk(:primary?) do
    interfaces = {}

    Facter.value(:networking)['interfaces'].each do |interface, values|
      interfaces[interface] = {:primary? => (interface == Facter.value(:networking)['primary'])}
    end

    interfaces
  end
  # Facter merges the return values for the two chunks
  # automatically, so there's no aggregate statement.
end
The fact’s output is organized by network interface into hashes, each containing the two chunks:
{
  bridge0 => {
    mac_sha256 => "bfgEFV7m1V04HYU6UqzoNoVmnPIEKWRSUOU650j0Wkk=",
    primary?   => false
  },
  en0 => {
    mac_sha256 => "6Fd3Ws2z+aIl8vNmClCbzxiO2TddyFBChMlIU+QB28c=",
    primary?   => true
  },
  ...
}

Example: Building a flat fact progressively with addition

Facter.add(:total_free_memory_mb, :type => :aggregate) do
  chunk(:physical_memory) do
    Facter.value(:memoryfree_mb)
  end

  chunk(:virtual_memory) do
    Facter.value(:swapfree_mb)
  end

  aggregate do |chunks|
    # The return value for this block determines the value of the fact.
    sum = 0
    chunks.each_value do |i|
      sum += i
    end

    sum
  end
end